Taytools 388220 Magnetic Bandsaw and Drill Press Fence with Switchable Magnets 18-Inch-Long x 3-Inch-Tall Fence with Blade Drift Adjustment

Highlights

• This magnetic fence can be used on any bandsaw or drill press with a magnetic ferrous table. One will not work on saws with cast or plastic tables. It can be quickly and easily installed and removed from a bandsaw or drill press table by simply turning on/off the two magnet levers.
• One can be installed and used without installing an aftermarket bandsaw fence with guide rails and can be used on bandsaws where the blade slot exits to the front of saws that will not accept aftermarket fences. Using the T fence, the fence can be set to accommodate for blade drift
• Specifications: 18” long by 3” tall, so it will work with most 10” to 18” bandsaws. Multiple T slots on fence will accept numerous stops, auxiliary fences, and jigs. Slots will accept 1/4-20 hex head bolts or Taytools 1/4” or 5/16” T bolts.
• Adjustable T fence allows the fence angle to be set to compensate for blade drift
• Comes standard with two 150-pound breakaway strength 90-degree switchable magnets Fence to table angle is calibrated to 90 degrees out of the box and will never need to be adjusted and fence is milled straight. Magnets can be installed in one of four locations to accommodate for various bandsaw table sizes and additional magnets can be added (up to four) to increase holding power