Anbull Portable Band Saw with Upgraded Removable Alloy Steel Base, 45°-90° Metal Cutting, 10A 1100W Motor, 5-inch Deep Cut, with .020-by-44-7/8-Inch 14 TPI Saw Blade and Led Spotlight

Highlights

• 1100W Powerful Pure Copper Motor: Industry best 10 amp motor designed with controlled power to withstand any jobsite application. Cutting steel will not produce sparks, no burrs, and the cut incision is smooth with no burns. Fits for steel, aluminum, composite cables,angle iron, PVC pipe and so on.
• New Upgraded Removable Alloy Steel Base: The base weights 6.6kg/14.6 lb and also can be Swiveled angle from 0 - 45°. It is easy to disassemble the base. With this workbench base, you can keep the cutting material does not slide, safe and convenient. Especially for precision cutting work.
• The cutting capcity: without base: 5-by- 4-3/4 In. deep-cut capacity for rectangular stock, 5 In. capacity for round stock , with base: 4-by- 3-1/5 In. deep-cut capacity for rectangular stock, 4 In. capacity for round stock. Variable-speed dial, 6-speed control,100-350 feet per minute, for specific materials and various applications.
• Superior balance allows for more accurate cuts. Ergonomic soft grip back handle provides comfort during use. Serviceable steel shroud and rubber bumpers allow guards to withstand jobsite abuse. The saw blade guard can be adjusted to protect the saw blade from jamming and safer without hurting your hands.
• About Band Saw Blades: Intalled with a .020-by-44-7/8-Inch 14 TPI blade. The saw blade has a long service life, and one saw blade is equal to 5 grinding wheels. You can install 3 kinds of saw blades, TPI10-14, TPI14-18, TPI24, choose different saw blades according to different materials in future.
• Selection of cutting speed for different materials: (1) Hard material, the speed is recommended to start from the 3rd speed; (2) For stainless steel, it is recommended that the speed not exceed 3 gears when cutting; (3) For 45# steel, the 4th and 5th gear is recommended for cutting speed; (4) Galvanized pipe, it is recommended to use the 6th gear when cutting